Clevertouch – Connect to Wireless Display

This guide will show you the process of connecting your staff laptop to a Clevertouch interactive board.

Step 1

Power on the Clevertouch board and press the following keys on your staff laptop: “Windows” + “K”

The “Cast” pop-up menu will then appear, select the board you want to display too.

Step 2

An invitation prompt will then appear on the Clevertouch board, press “Accept”.

Please note, this step will only occur the first-time you connect to board.

Step 3

A miracast request will then appear on the bottom right of the board, press “Accept”.

Once done, your staff laptop will start displaying to the Clevertouch board.

Step 4

Once connected, on the “Cast” popup menu, click the box highlighted in the image below. This will enable you to control your laptop from the board.